Routing/Routing Mcq Question Set 5 Sample Test,Sample questions

Question:
A Distance Vector router running distance vector protocol advertises its connected routes and learns new routes from its neighbors.

1. Yes

2. No

3.Can be yes or no

4.Can not say


Question:
A metric is the cost assigned for passage of a packet through a

1.Network

2.Protocol

3. Group Tree

4. Router


Question:
A static routing table contains information entered

1.Automatically

2.Manually

3.Directly

4. Indirectly


Question:
A stub link is a network that is connected to

1.One router

2.Two routers

3.Three routers

4.Four routers


Question:
A _________ is a device that forwards data that is not explicitly destined to it.

1.hub

2.switch

3. router

4. All of the above


Question:
An Autonomous System (AS) is a group of networks and routers under the authority of a single

1.Membership

2.Ownership

3.Administration

4.Management


Question:
An _______ distributes routing information between two different autonomous systems or organization.

1.Interior Routing Protocol

2.Exterior Routing Protocol

3.Link-State Routing Protocol

4.Distance Vector Routing Protocol


Question:
BGP stands for

1.Border Gateway Packet

2.Border Gateway Protocol

3.Border Gateway Path

4.Border Gateway Plan


Question:
BGP stands for

1.Border Gateway Packet

2.Border Gateway Protocol

3.Border Gateway Path

4.Border Gateway Plan


Question:
Border Gateway Protocol (BGP) is an interdomain routing protocol using

1.Path routing table

2.Routing Information Protocol

3.Distance vector routing

4.Path vector routing


Question:
CBT stands for

1.Core-Based Transmission

2.Core-Based Tree

3.Core-Based Tracer

4.Core-Based Target


Question:
For multicasting between two noncontiguous multicast routers, we make a multicast backbone (MBONE) to enable

1.Drilling

2.Digging

3.Tunneling

4.Stabling


Question:
Good examples of transit Autonomous Systems are national and international

1. ISP

2.BGP

3.RIP

4.NIP


Question:
Host-specific routing is used for purposes such as checking the route or providing

1.Network Measures

2.Security Measures

3. Routing Measures

4. Delivery Measures


Question:
If there is only one routing sequence for each source destination pair, the scheme is known as .....

1.static routing

2.fixed alternative routing

3. standard routing

4. dynamic routing


Question:
If your routing table has a static, a RIP, and an IGRP route to the same network, which route will be used to route packets by default?

1.Any available route

2.RIP route

3. Static route

4.IGRP route


Question:
In an autonomous system, we are dealing with routers and

1.Stations

2.Bridges

3.Networks

4. Protocols


Question:
In broadcast communication, the relationship between the source and the destination is

1.One to all

2.Many to one

3.One to many

4.One to one


Question:
In Core-Based Tree (CBT), if a router wants to leave the group then it sends a leave message to its

1.Downstream Router

2.Router Path

3. Upstream Router

4.Stable Router


Question:
In Core-Based Tree (CBT), when the router has received all join messages, then the tree will be

1.Indexed

2.Framed

3.Stablized

4.Formed


Question:
In Longest Mask Matching, three entries are 127, 126, 124, the first entry should be

1. 124

2.126

3.127

4.127 and 124


Question:
In Multicast Routing Protocol, flooding is used to broadcast the packets but it creates

1.Gaps

2.loops

3. Errors

4.long strings


Question:
In Multicast Routing Protocol, the teleconferencing is the application of

1. Multicast

2.Multiple unicast

3.Broadcast

4.Unicast


Question:
In multicast routing, when a router receives a packet to forward, it needs to find the shortest path to the

1.Sender

2.Destination

3.Medium

4. First Node


Question:
In Unicast Routing, If the instability is between three nodes, stability cannot be

1.Stablized

2.Reversed

3.Guaranteed

4.Minimized


Question:
In Unicast Routing, the Dijkstra algorithm creates a shortest path tree from a

1. Graph

2.Chart

3.Station

4.Link State


Question:
In Unicast Routing, the size of the network in the distance vector routing can not exceed

1. 2 hops

2.5 hops

3. 10 hops

4.15 hops


Question:
In Unicast Routing, to avoid two-node instability we can use split horizon strategy combined with

1. Poison reverse

2.Poison Stability

3.Poison strategy

4.Poison forward


Question:
In Unicast Routing, triggered updating process, when a node detects some failure in the neighboring links which results in a distance change to

1.Maximum value

2.Minimum value

3. Infinity

4.Zero


Question:
Multicasting is more efficient than

1.Unicast

2.Multilevel-cast

3.multi unicast

4.Broadcasting


Question:
OSPF stands for

1.Open Shortest Path File

2.Open Shortest Packet First

3.Open Shortest Path First

4.Open System Path First


Question:
Protocol Independent Multicast (PIM) has two independent multicast Protocols, those are

1.PIM-DM and PIM-DS

2.PIM-DM and PIM-DR

3. PIM-DM and PIM-DL

4. PIM-DM and PIM-SM


Question:
Protocol Independent Multicast-Sparse Mode (PIM-SM) is used in sparse multicast environment such as

1. WAN

2.MAN

3.LAN

4.Switches


Question:
Protocol Independent Multicast-Sparse Mode (PIM-SM) is used when there is a slight possibility that each router is involved in

1.Unicasting

2.Protocol

3. Group Sharing

4.Multicasting


Question:
Reverse Path Forwarding (RPF) eliminates the loop in the

1.Flooding Process

2. Formation Process

3.Protocol Process

4.Unicast Vector Process


Question:
Reverse Path Forwarding (RPF) is not based on

1.Source Address

2. IP Address

3.Destination Address

4.Protocol Process


Question:
Reverse Path Multicasting (RPM) is used to increase

1.Creativity

2.Availibilty

3. Efficiency

4.Strength


Question:
RIPng stands for ____

1.Routing Information Path Next Generation

2.Routing Interior Protocol Next Generation

3.Routing Information Protocol Next Gateway

4.Routing Information Protocol Next Generation


Question:
Routing protocols can be divided in ________ categories.

1.2

2.3

3.4

4.5


Question:
Techniques can make the size of the routing table manageable and also handle issues such as

1.Flow control

2.Error reporting

3. Tunneling

4.Security


Question:
The ......... protocol allows the administrator to assign a cost, called the metric, to each route.

1. OSPF

2.RIP

3.BGP

4.BBGP


Question:
The Core-Based Tree (CBT) is a

1.Group Routing Tree

2.Group Shared Tree

3. Group Formed Tree

4.Group Protocol Tree


Question:
The designated parent router of each network is responsible for holding the membership

1. Address

2.Protocol

3. Source

4.information


Question:
The Open Shortest Path First(OSPF) protocol is an intra domain routing protocol based on ........ routing.

1.distance vector

2.link state

3.path vector

4.non distance vector


Question:
The router forwards the received packet through only one of its interfaces in

1.Multicast delivery

2.Broadcast delivery

3.Unicast delivery

4.Omnicast delivery


Question:
There exists ________ forms of routing protocols.

1.1

2.2

3.3

4. 4


Question:
What is split horizon?

1.Information about a route should not be sent back in the direction from which the original update came.

2.It splits the traffic when you have a large bus (horizon) physical network.

3. It holds the regular updates from broadcasting to a downed link.

4.It prevents regular update messages from reinstating a route that has gone down.


Question:
When the source and destination of the packet are located on the same physical network, then

1.Direct delivery Fails

2.Direct delivery Delay

3. Direct delivery Occurrs

4.Direct delivery Stops


Question:
Which of the following is not the requirement of routing function?

1.Correctness

2.Robustness

3.Delay time

4.Stability


Question:
_____ is an upgraded implementation of ICMP to accommodate IPv6 requirements.

1.ICMPv6

2. DHCPv6

3. DNS

4. None of the above


More MCQS

  1. Routing Mcq Question Set 1
  2. Routing Mcq Question Set 2
  3. Routing Mcq Question Set 3
  4. Routing Mcq Question Set 4
  5. Routing Mcq Question Set 5
  6. Routing Mcq Question Set 6
  7. Routing Mcq Question Set 7
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!