Engineering/Traffic Engineering MCQ Sample Test,Sample questions

Question:
 Which of the following is known as the time lost by traffic due to traffic friction and traffic control devices?

1.Setback time

2.Delay

3.Green time

4.Red time


Question:
 Which of the following is the traffic that is prepared based on 365 days of the year?

1.Annual average daily traffic

2.Average daily traffic

3.Average yearly traffic

4.Yearly traffic


Question:
Capacity is a probabilistic measure.

1.True

2.False


Question:
Capacity is measured as a reasonably expected value and not the maximum flow rate observed in the facility. Why?

1.Because capacity at a given location varies from day to day

2.Because capacity at a given location doesn’t vary

3.Because capacity at a given location varies from year to year

4.Because capacity at a given location decreases simultaneously


Question:
Fixed delay does not depend on which of the following factor?

1.Traffic signals

2.Traffic volume

3.Markers

4.Level crossing


Question:
Highway capacity is independent of _____

1.demand

2.lane width

3.geometric design

4.traffic conditions


Question:
How many types of highway capacity was defined by Highway Capacity Manual (1950)?

1.2

2.5

3.3

4.4


Question:
If the space headway is 7m, then the jam density in vehicle/km is __________

1.142

2.144

3.145

4.146


Question:
In countries like USA and UAE, which of the regulation is followed?

1.Keep to left

2.Keep to right

3.Keep to middle

4.Follow intersection


Question:
In traffic engineering, the elements are classified into how many categories?

1.Four

2.Three

3.One

4.Two


Question:
The distance between the two consecutive vehicles is called __________

1.Space headway

2.Time headway

3.Jam density

4.Traffic flow


Question:
The maximum jam density occurs at __________

1.Zero speed

2.15th percentile speed

3.30th percentile speed

4.98th percentile speed


Question:
The minimum space headway increases with __________

1.Increase in length of vehicle

2.Increase in width of vehicle

3.Increase in weight of vehicle

4.Increase in width of pavement


Question:
The road traffic consists of how many types of traffic?

1.Vehicular and pedestrian traffic

2.No traffic

3.Pedestrian traffic

4.Vehicle traffic


Question:
The speed at which the value of time headway is lowest represents the __________

1.Optimum speed

2.Maximum speed

3.Maximum headway

4.Minimum headway


Question:
The study of traffic engineering is divided into how many major categories?

1.Eight

2.Five

3.Six

4.Seven


Question:
The vehicles per unit length at any instant of time is called as __________

1.Density

2.Jam density

3.Maximum density

4.Traffic flow


Question:
The weaving manoeuvres is a type of __________

1.Merging

2.Diverging

3.Intersection

4.Crossing


Question:
What does “3-Es” of traffic engineering stand for?

1.Engineering, education and enthusiasm

2.Engineering, education and enforcement

3.Engineering, education and expulsion

4.Enforcement, empowerment and eradication


Question:
What is maximum flow rate?

1.Worst 15 minutes of the peak hours

2.Worst 10 minutes of peak hours

3.Worst 30 minutes of the peak hours

4.Worst 5 minutes of the peak hours


Question:
What is the capacity value for urban roads as per IRC for one-way traffic flow with two lanes?

1.1500 PCU/hr

2.2400 PCU/hr

3.3600 PCU/hr

4.4000 PCU/hr


Question:
What is the definition of Highway Capacity?

1.The minimum traffic flow that can be accommodated in a highway facility in a given time period under existing roadway and control conditions

2.The maximum traffic flow that can be accommodated in a highway facility in the future

3.The minimum traffic flow that can be accommodated in a highway facility ading to data fromccor the previous year

4.The maximum traffic flow that can be accommodated in a highway facility in a given time period under existing roadway and control conditions


Question:
What is the purpose of a Travel Time and Delay Study?

1.To evaluate the traffic stream

2.For survey data

3.To assess the quality of traffic movement

4.To assess the time taken to travel by various vehicles


Question:
What is traffic engineering?

1.Traffic engineering optimizes the performance and efficiency of the movement of people, goods, and transportation

2.Traffic engineering mainly deals with improving traffic performance, traffic studies, and traffic networks

3.The main goal of traffic engineering is to reduce high-speed collisions

4.All of the mentioned


Question:
When are mail-back postcard surveys usually used?

1.When traffic volume is low

2.When traffic is homogeneous

3.When traffic is heterogeneous

4.When traffic volume is high


Question:
When the gap of the vehicle changes to a smaller lane then it is called __________

1.Lane change

2.Forced lane change

3.Simultaneous lane change

4.Voluntary lane change


Question:
Which branch of engineering deals with the improvement of traffic studies and traffic networks?

1.Traffic engineering

2.Traffic management

3.Railway engineering

4.Highway engineering


Question:
Which is the first stage in traffic engineering studies?

1.Spot speed studies

2.Traffic volume studies

3.Origin and destination studies

4.Speed and delay studies


Question:
Which is the most important objective of traffic engineering?

1.To provide a high speed road without any other priority

2.To increase the traffic

3.To reduce the accidents

4.To consider pedestrians as obstruction


Question:
Which of the following are the disadvantages of traffic signals?

1.The quality of the traffic flow improves

2.Traffic handling capacity increases

3.The rear end collision increases

4.Provide orderly moment at intersection


Question:
Which of the following capacity is considered as design capacity?

1.Basic capacity

2.Possible capacity

3.Practical capacity

4.Traffic capacity


Question:
Which of the following does not affect traffic flow?

1.Vehicles travelling at speed

2.Length of the vehicle

3.Weather conditions

4.Geometric design


Question:
Which of the following does the thickness of lines represents in Traffic flow maps?

1.Volume change

2.Boundary for expansion

3.Direction of flow

4.Traffic volume


Question:
Which of the following is not a category of Traffic Studies?

1.Dynamic studies

2.Inventories

3.Economic studies

4.Administrative studies


Question:
Which of the following is not a factor affecting traffic capacity?

1.Traffic control devices

2.Gradient

3.Lane width

4.Lateral clearance


Question:
Which of the following is not a parameter of traffic stream?

1.Speed

2.PCU

3.Density of traffic

4.Flow of traffic


Question:
Which of the following is not a way by which traffic volume data is presented?

1.Modal average

2.Traffic composition

3.Variation charts

4.AADT


Question:
Which of the following is not determined by traffic volume studies?

1.Number of vehicles

2. Movement of vehicles

3.Design criteria

4.Vehicle classification


Question:
Which of the following is one of the uses of a collision diagram?

1.Demarcating area for parking

2.Record of accident occurrence

3.Interpreting traffic data

4.Redesign of traffic lights


Question:
Which of the following is the first phase of traffic regulation?

1.Traffic flow regulations

2.General controls

3.Vehicle controls

4.Driver controls


Question:
Which of the following is the first stage in the function of the traffic engineering department?

1.Collection of data

2.Planning and design

3.Finance

4.Investigations


Question:
Which of the following is the most vulnerable part of the traffic?

1.Cattle

2.Pedestrians

3.Vehicles

4.Traffic jam


Question:
Which of the following is the number of vehicles crossing a section of road in a unit time at any selected period?

1.Traffic density study

2.Traffic characteristic study

3.Traffic volume study

4.Traffic mass study


Question:
Which of the following is the primary disadvantage of Roadside interview method?

1.Requires more manpower

2. Traffic disruption

3.Huge set of data

4.Skilled surveyors


Question:
Which of the following parameter is not dependent on highway capacity?

1.Class of highway

2.Lane width

3.Number of lanes

4.Gauge width


Question:
Which of the following represents traffic volume from one key area to another in a desire line map?

1.Dark line

2.Circles

3.Triangles

4.Dots


Question:
Which of the following traffic study determines total parking demand?

1.Parking studies

2.Travel time studies

3.Accident studies

4.Traffic volume study


Question:
Which of the following traffic study uses traffic models to analyze traffic?

1.Accident studies

2.Traffic volume studies

3. Calibration studies

4.Parking studies


Question:
Which of the following type of parking has areas exclusively allotted for parking at some distance away from the mainstream of traffic?

1.30 degrees parking

2.Right-angle parking

3.Off-street parking

4.Parallel parking


Question:
Which one of the following is not a common application OD survey?

1.Traffic volume studies

2.Major activity centre studies

3.Weaving-area studies

4.Freeway studies


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!