Engineering/Highway Engineering MCQs Sample Test,Sample questions

Question:
 The roads passing through hilly terrain and leading to the villages and towns near hills are called __________

1.National highway

2.State highway

3. Hill road

4.Village road


Question:
As per the Nagpur plan, the un-surfaced roads were meant for _____________

1.National highway

2.State highway

3.Major district road

4.Other district road and village road


Question:
Class II of two-lane highway is a short trip.

1.True

2.False


Question:
Demand-forecasting model is based on which traffic studies?

1.Speed studies

2.Traffic volume study

3.Travel time studies

4.Accident studies


Question:
Demographic factors do not include __________

1.GDP

2.Population in urban cities

3.Population in rural areas

4.Overall population


Question:
During the development of the roads maximum priority is given to which type of road?

1.National highway

2.State highway

3.Major district road

4.Village road


Question:
Expressways should be constructed along __________

1.Congested cities

2.Major traffic corridors

3.Along with highways

4.Small cities


Question:
For a terrain to be termed as steep, the cross slope should be greater than __________

1.25

2.35

3.45

4.60


Question:
If the jam density is 145vehicles/km, and velocity is 60kph then the capacity flow is __________

1.2175

2.2200

3.2375

4.2500


Question:
In which class of two-lane highway does motorists not travel at high speeds?

1.Class I

2.Class II

3.Class III

4.Class IV


Question:
In which of the following cases Travel Time and Delay Study is not used?

1.To compare operational conditions before and after enhancements have been made

2.To compare operational inadequacies in each project

3.To monitor LOS of road

4.To compare the design width of the road in each condition


Question:
In which of the following methods given below does the observer travels and makes a round trip along a test section in a traffic stream?

1.Floating car method

2.Average speed method

3.Spot speed method

4.License plate method


Question:
In which terms is LOS defined in class I highways?

1.Only percentage time spent following

2.Only average travel time

3.Percentage time spent following and average travel time

4.PCU


Question:
In which terms is LOS defined in class II highways?

1.Only percentage time spent following

2.Only average travel time

3.Percentage time spent following and average travel time

4.PCU


Question:
Land use, transportation and road network plans are __________

1.Inter linked

2.Intra linked

3.Not linked

4.Depends on the network


Question:
Speed studies are conducted for what primary purpose?

1.Traffic census

2.Safety

3.Quality of service

4.Planning


Question:
The ‘rural road development plan: Vision 2025’ aims to provide basic access to villages in how many phases?

1.One

2.Two

3.Three

4.Four


Question:
The cross slope for a pavement to be plain should be less than __________

1.40

2.35

3.25

4.10


Question:
The delay caused by the intervention by other components of traffic is called __________

1.Operational delay

2.Fixed delay

3.Stopped delay

4.Approach delay


Question:
The equivalency factor for the car recommended by IRC is?

1.0.5

2.1.0

3.1.5

4.2.0


Question:
The first stage in the function of traffic engineering department is?

1.Planning and design

2.Collection of data

3.Investigations

4.Finance


Question:
The hill road should be aligned __________

1.Stable side

2.Unstable side

3.Based on economy

4.Based on population


Question:
The hill roads in India are not mostly found in __________

1.North India

2.North east India

3.Western that’s

4.South India


Question:
The maximum number of cities and towns are connected by which type of highway?

1.National highway

2.State highway

3.Major district road

4.Village road


Question:
The maximum theoretical capacity is __________

1.1000V/S

2.1000S/V

3.1000S

4.1000V


Question:
The NHDP are being undertaken by private companies on the basis of __________

1.Profit

2.Revenue

3.BOT

4.Commission basis


Question:
The number of vehicles crossing a section of road in a unit time at any selected period is called ____________

1.Traffic volume study

2.Traffic density study

3.Traffic mass study

4.Traffic characteristic study


Question:
The problem not faced in hilly regions is?

1.Extreme climate

2.Landslide

3.Snow

4.Summer cracks in pavements


Question:
The tertiary road system consists of __________

1.National highway

2.State highway

3.Major district road

4.Other district road and village road


Question:
The time lost by traffic due to traffic friction and traffic control devices is called _____

1.Delay

2.Green time

3.Red time

4.Setback time


Question:
The total area of a state is 2500km. Calculate the length of MDR.

1.100 km

2.200 km

3.300 km

4.400 km


Question:
The total length of highways in 2001 in km was __________

1.56000

2.56756

3.56750

4.57000


Question:
The total time of travel, including stop and delay, to travel from one point of a section to another under existing traffic condition is called __________

1.Operational delay

2.Travel time

3.Fixed delay

4.Approach delay


Question:
The traffic population is estimated by __________

1.Arithmetic method

2.Geometric method

3.Incremental increase method

4.Harmonic method


Question:
The traffic will increase if the __________

1.Price of fuel decreases

2.Price of vehicles decreases

3.Price of fuel decreases

4.Price of vehicles decreases


Question:
Total parking demand is determined by which traffic study?

1.Accident studies

2.Traffic volume study

3.Travel time studies

4.Parking studies


Question:
Traffic forecast is not influenced by __________

1.GDP

2.Industrial output

3.Population

4.Weather


Question:
Traffic islands are used to increase the length of the crossing.

1.True

2. False


Question:
Two-lane highways are classified into how many classes for the purpose of analysis?

1.1

2.3

3.2

4.4


Question:
Two-lane highways have which factor as the MoE (measure of effectiveness)?

1.Density

2.Capacity

3.PCU

4.Speed/delay


Question:
What is a major consideration in class-I highways?

1.Density

2.Delay

3.Speed

4.Distance


Question:
What is the difference between the actual time required to cross a section of a road and the time taken corresponding to the average speed of traffic under free-flow condition called?

1.Travel time delay

2.Congestion delay

3.Stopped Delay

4.Approach Delay


Question:
What is the main cause of accidents in urban areas?

1.Improper planning

2.Extra wide roads

3.Additional thickness of the pavement

4.Traffic congestion


Question:
What was the development allowance assumed in the Nagpur plan?

1.10%

2.20%

3.15%

4.25%


Question:
Which class of two-lane highway serves as scenic or recreational routes?

1.Class I

2.Class II

3.Class III

4.Class IV


Question:
Which of the following is not a method for obtaining travel time and delay studies?

1.Floating car method

2.Average speed method

3.Interview method

4.Spot speed method


Question:
Which traffic study records the existing truck loading facilities and transit system?

1.Goods movement and Transit studies

2.Parking studies

3.Traffic volume studies

4.Travel time studies


Question:
Which traffic study studies the effectiveness of various traffic control devices?

1.Calibration studies

2.Observation studies

3.Parking studies

4.Traffic volume studies


Question:
Which traffic study uses traffic models to analyze traffic?

1.Traffic volume studies

2.Calibration studies

3.Parking studies

4.Accident studies


Question:
Which type of roads does class-I include?

1.Major inter-city roads

2.Village roads

3.Districts roads

4.Streets


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!