Engineering/Mechanical Engineering Engineering MCQS -Mechanics Section-2 Sample Test,Sample questions

Question:
 
A framed structure is imperfect, if the number of members are __________ (2j - 3).

1.equal to

2.less than

3.greater than

4. either (b) or ©


Question:
 
According to the law of moments, if a number of coplaner forces acting on a particle are in equilibrium, then

1. their algebraic sum is zero

2.their lines of action are at equal distances

3. the algebraic sum of their moments about any point in their plane is zero

4. the algebraic sum of their moments about any point is equal to the moment of their resultant force about the same point.


Question:
 
Onejoule is equal to

1.0.1 N-m

2.1 N-m

3.10 N-m

4. 100 N-m


Question:
 
The motion of a particle round a fixed axis is

1.translatory

2.rotary

3.circular

4.translatory as well as rotatry


Question:
 
The rate of change of displacement of a body is called

1.velocity

2.acceleration

3.momentum

4.none of these


Question:
 
The rate of doing work is known as

1.potential energy

2.kinetic energy

3.power

4. none of these


Question:
 
The total energy possessed by a system of moving bodies

1. is constant at every instant

2. varies from point to point

3.is maximum in the start and minimum at the end

4.is minimum in the start and maximum at the end


Question:
  
A differential pulley block has larger and smaller diameters of 100 mm and 80 mm respectively. Its velocity ratio is

1.5

2.10

3.20

4.40


Question:
  
A rubber ball is dropped from a height of 2 m. If there is no loss of velocity after rebounding, the ball will rise to a height of

1.1m

2.2m

3.3m

4.4m


Question:
  
Non-coplaner concurrent forces are those forces which

1.meet at one point, but their lines of action do not lie on the same plane

2.do not meet at one point and their lines of action do not lie on the same plane

3.meet at one point and their lines of action also lie on the same plane

4.do not meet at one point, but their lines of action lie on the same plane


Question:
  
The principle of transmissibility of forces states that, when a force acts upon a body, its effect is

1.same at every point on its line of action

2.different at different points on its line of action

3. minimum, if it acts at the centre of gravity of the body

4. minimum, if it acts at the centre of gravity of the body


Question:
  
The total momentum of a system of masses (i. e. moving bodies) in any one direction remains constant, unless acted upon by an external force in that direction. This statement is called

1.Newton's first law of motion

2.Newton's second law of motion

3.principle of conservation of energy

4.principle of conservation of energy


Question:
A couple produces

1.translatory motion

2.rotational motion

3.combined translatory and rotational motion

4.none of the above


Question:
A machine having an efficiency less than 50%, is known as

1.reversible machine

2.non-reversible machine

3.neither reversible nor non-reversible machine

4.ideal machine


Question:
A weight of 1000 N can be lifted by an effort of 80 N. If the velocity ratio is 20, the machine is

1.reversible

2.non-reversible

3.ideal

4.none of these


Question:
Concurrent forces are those forces whose lines of action

1.lie on the same line

2.meet at one point

3. meet on the same plane

4.none of these


Question:
For a self locking machine, the efficiency must be

1.equal to 50%

2.less than 50%

3.greater than 50%

4.100%


Question:
In ideal machines, mechanical advantage is __________ velocity ratio.

1. equal to

2.less than

3. greater than

4. none of these


Question:
The acceleration of a particle moving with simple harmonic motion is __________ at themean position.

1.zero

2.minimum

3.maximum

4.none of these


Question:
The angular velocity (in rad / s) of a body rotating at N revolutions per minute is

1. πN/60

2. πN/180

3.2πN/60

4.2πN/180


Question:
The centre of gravity of a semi-circle lies at a distance of __________ from its base measured along the vertical radius.

1.3r/ 8

2. 4r/ 3π

3.8r/3

4. 3r/4π


Question:
The maximum efficiency of a lifting machine is

1.1/m

2.V.R./m

3. m/V.R.

4.1/(m x V.R.)


Question:
The minimum force required to slide a body of weight W on a rough horizontal plane is

1.W sin θ

2.W cos θ

3.W tan θ

4. none of these


Question:
The point, through which the whole weight of the body acts, irrespective of its position, is known as

1.moment of inertia

2.centre of gravity

3.centre of percussion

4.centre of mass


Question:
The potential energy of a vertically raised body is __________ the kinetic energy of a vertically falling body.

1.equal to

2.. less than

3.greater than

4.none of these


Question:
The rate of change of momentum is directly proportional to the impressed force, and takes place in the same direction in which the force acts. This statement is known as

1.Newton's first law of motion

2.Newton's second law of motion

3.Newton's third law of motion

4.none of these


Question:
The resultant of the two forces P and Q is R. If Q is doubled, the new resultant is perpendicular to P. Then

1.P = Q

2.Q = R

3.Q = R

4.none of these


Question:
The static friction

1.bears a constant ratio to the normal reaction between the two surfaces

2. is independent of the area of contact, between the two surfaces

3.always acts in a direction, opposite to that in which the body tends to move

4. all of the above


Question:
The unit of work in S.I. units is

1.newton

2.erg

3. kg-m

4.joule


Question:
The velocity of a particle moving with simple harmonic motion is __________ at the mean position.

1.zero

2.minimum

3.maximum

4.none of these


Question:
When the spring of a watch is wound, it will possess

1.strain energy

2.kinetic energy

3.heat energy

4.electrical energy


Question:
Whenever a force acts on a body and the body undergoes a displacement, then

1. work is said to be done

2. work is said to be done

3.body has kinetic energy of translation

4.none of these


Question:
Which of the following are vector quantities?

1.Linear displacement

2. Linear velocity

3.Linear acceleration

4.all of these


Question:
Which of the following is a scalar quantity?

1.Force

2.Speed

3.Velocity

4.Acceleration


Question:
Which of the following statement is correct?

1.The kinetic energy of a body during impact remains constant.

2.The kinetic energy of a body before impact is equal to the kinetic energy of a body after impact.

3.The kinetic energy of a body before impact is less than the kinetic energy of a body after impact.

4. The kinetic energy of a body before impact is more than the kinetic energy of a body after impact.


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!