Engineering/Civil Engineering -MCQS-Waste Water Engineering - Section 3 Sample Test,Sample questions

Question:
 
Afive day B.O.D. at 15°C of the sewage of a town is 100 kg/day. If the 5 day B.O.D. per head at 15°C for standard sewage is 0.1 kg/day; the population equivalent is

1.100

2.1000

3.5000

4.10000


Question:
 
At the junction of sewers

1.top of smaller sewer is kept lower

2. top of larger sewer is kept lower

3.tops of both the sewers are at the same level

4.none of these


Question:
 
The pH value of sewage is determined with the help of

1.Imhoff Cone

2.turbidimeter

3.potentiometer

4.none of these


Question:
  
Design period of 40 to 50 years is adopted for

1.branch sewers

2.main sewers

3.trunk sewers

4.all the above.


Question:
  
In circular sewers if depth of flow is 02 times the full depth; the nominal gradient;

1. is only provided

2.is doubled

3.is trebled

4.is not enough.


Question:
  
Lead caulked joints are used for laying

1. stone ware pipes

2.earthern ware pipes

3.C.I. pipes

4.G.I. pipes.


Question:
  
Stoneware sewers are available in size

1.10 cm

2.15 cm

3.20 cm

4.25 cm


Question:
Depletion of ozone layer in the outer atmosphere may cause

1.lung cancer

2.skin cancer

3.bronchitis

4.heart disorder.


Question:
For trunk sewers more than 1.25 m in diameter; the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed

1.1.5

2.2

3.2.5

4.3


Question:
If the peak discharge of a storm water drain (S.W. Drain) is e.xpected to exceed 150 cumecs; the free board to be provided; is

1.100 cm

2.90 cm

3.80 cm

4.50 cm


Question:
In trickling filter; B.O.D. is reduced to

1.30 to 40%

2.40 to 60%

3.60 to 80%

4. 80 to 90%


Question:
Inter-distance between ventilation columns in a sewer line is kept

1.25 to 50 m

2. 50 m to 100 m

3.100 m to 150 m

4.150 m to 300 m.


Question:
The pH value of fresh sewage is usually

1.equal to 7

2.more than 7

3.less than 7

4.equal to zero.


Question:
Pick up the correct statement from the following :

1.The water supply pipes carry pure water free from solid particles

2.The water supply pipes get clogged if flow velocity is less than self cleansing velocity

3.The sewers may be carried up and down the hills and valleys

4.None of these


Question:
Primary treatment of sewage consists of removal of

1.large suspended organic solids

2.oil and grease

3.sand and girt

4.none of these


Question:
Sluge banks are formed if sewage is disposed of in

1.rivers

2.seas

3.lakes

4.none of these


Question:
The density of population over 40 hectares is 250/hectare. If water supply demand per day is 200 litres and sewage discharge is 80% of water supply; the sewage flow in sewers of separate system; is

1. 0.05552 cumec

2.0.05554 cumec

3.0.0556 cumec

4. 0.0558 cumec.


Question:
The design period in years for pumping plants; is

1.1

2.2 to 3

3.3 to 5

4.5 to 10


Question:
The factor responsible for purification of sewage in river is

1.Hydrology

2.Dissolved oxygen in water

3.Temperature

4.Turbulence


Question:
The maximum spacing of manholes specified by Indian standard in sewers upto 0.3 m diameter is

1.20 m

2.30 m

3.45 m

4.75 m


Question:
The moisture content of a sludge is reduced from 90% to 80% in a sludge digestion tank. The percentage decrease in the volume of sludge; is

1.25%

2.50%

3.10%

4.5%


Question:
The rainfall at any place may be determined by

1.its intensity

2.its direction

3.its frequency

4.all the above.


Question:
The self-cleansing velocity of water flowing through pipe lines; is

1.2 metres/sec

2.1 metre/sec

3.0.5 metre/sec

4.0.25 metre/sec.


Question:
The sludge does not contain waste water from 

1.bath rooms

2.wash basins

3.kitchen sinks

4.toilets.


Question:
The spacing of bars of perforations of fine screens used for the treatment of sewage; is

1.2 to 3 mm

2.3 to 5 mm

3.5 to10 mm

4.8 to 10 mm


Question:
The water carried sewerage system removes

1.domestic sewage

2. industrial sewage

3.storm sewage

4. all the above.


Question:
Ventilating shafts are provided to a sewer line at every

1.100 m

2.150 m

3.200 m

4.300 m


Question:
Which one of the following gases is most significant as air pollutant

1.Carbondioxide

2.Oxygen

3.Nitrogen

4.Sulphurdioxide.


Question:
Which one of the following part of human body withstands minimum radiation

1.thyroid

2.kidneys

3.eyes

4.ovaries/testis.


Question:
Which one of the following statements regarding septic tanks is wrong :

1.a gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided

2.the outlet invert level is kept 5 to 7.5 cm below the inlet invert level

3. the minimum width of septic level is 90 cm

4.the depth of tank is kept equal to its width


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!