Engineering/Civil Engineering [MCQS] Applied Mechanics Section -2 Sample Test,Sample questions

Question:
 
For maximum range of a projectile, the angle of projection should be

1.30°

2.45°

3.60°

4. none of these.


Question:
 
If two forces acting at a point are in equilibrium, they must be equal in magnitude and their line of action must be along

1.the same line in the same sense

2.the same line in opposite sense

3. the perpendicular to both the lines

4.none of these.


Question:
  
A Seconds pendulum executes

1.0.5 beat per second

2.1.0 beat per second

3.2.0 beats per second

4.2.5 beats per second


Question:
  
Ball A of mass 250 g moving on a smooth horizontal table with a velocity of 10 m/s hits an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after impact would be

1.zero

2.5 m/sec

3.10 m/sec

4.none of these.


Question:
  
For a body moving with simple harmonic motion, the number of cycles per second, is known as its

1.oscillation

2.amplitude

3.periodic time

4.frequency.


Question:
  
If the horizontal range is 2.5 times the greatest height, the angle of projection of the projectile, is

1.57°.

2.58°.

3.60°.

4.60°.


Question:
  
If two forces P and Q (P > Q) act on the same straight line but in opposite direction, their resultant, is

1.P + Q

2.P/Q

3.Q/P

4. P - Q


Question:
  
Lami's theroem states that

1. three forces acting at a point are always in equilibrium

2. if three forces acting on a point can be represented in magnitude and direction by the sides of a triangle, the point will be in the state of equilibrium

3.three coplaner forces acting at a point will be in equilibrium, if each force is proportional to the sine of the angle between the other two

4.three coplaner forces acting at a point will be in equilibrium if each force is inversely proportional to the sine of the angle between the other two


Question:
  
One end of a light string 4 m in length is fixed to a point on a smooth wall and the other end fastened to a point on the surface of a smooth sphere of diameter 2.25 m and of weight 100 kg. The tension in the string is

1.17.5 kg

2.19.5 kg

3. 22.5 kg

4.25 kg


Question:
  
Power can be expressed as

1.work/energy

2.work/time

3.work x time

4.work/distance.


Question:
  
The resultant of the forces acting on a body will be zero if the body

1.rotates

2.moves with variable velocity in a straight line

3. moves along a curved path

4.does not move at all.


Question:
  
The velocity of a moving body, is

1.a vector quantity

2.a scalar quantity

3. a scalar as well as a vector quantity

4.none of these.


Question:
  
To avoid bending action at the base of a pier,

1.suspension and anchor cables are kept at the same level

2. suspension and anchor cables are fixed to pier top

3.suspension cable and anchor cables are attached to a saddle mounted on rollers on top of the pier

4.none the these.


Question:
A 50 kg boy climbs up a 8 m rope in gymnasiam in 10 sec. The average power developed by the boy is approximately

1.400 watts

2.500 watts

3.4000 watts

4.none of these.


Question:
A ball moving with a velocity of 5 m/sec impinges a fixed plane at an angle of 45° and its direction after impact is equally inclined to the line of impact. If the coefficient of restitution is 0.5, the velocity of the ball after impact will be

1.0.5 m/sec

2. 1.5 m/sec

3.2.5 m/sec

4.3.5 m/sec


Question:
A body is said to move with Simple Harmonic Motion if its acceleration, is

1.always directed away from the centre, the point of reference

2. proportional to the square of the distance from the point of reference

3.proportional to the distance from the point of reference and directed towards it

4. inversely proportion to the distance from the point of reference


Question:
A particle moves with a velocity of 2 m/sec in a straight line with a negative acceleration of 0.1 m/sec2. Time required to traverse a distance of 1.5 m, is

1.40 sec

2.30 sec

3.20 sec

4.15 sec


Question:
A projectile is fired with a velocity of 100.3 m/sec. at an elevation of 60°. The velocity attained by the projectile when it is moving at a height of 100 m, is

1.70 m/sec.

2.75 m/sec.

3.80 m/sec.

4.90 m/sec.


Question:
A Second's pendulum gains 2 minutes a day. To make it to keep correct time its length

1.must be decreased

2. must be increased

3.is not changed but weight of the bob is increased

4. is not changed but weight of the bob is decreased


Question:
A spring scale in a stationary lift shows a reading of 60 kg for a man standing on it. If the lift starts descending at an acceleration of g/5, the scale reading would be

1.48 kg

2.60 kg

3.72 kg

4.none of these.


Question:
According to Law of Triangle of Forces

1.three forces acting at a point, can be rep-resented by the sides of a triangle, each side being in proportion to the force

2.three forces acting along the sides of a triangle are always in equilibrium

3.if three forces acting on a, point can be represented.in magnitude and direction, by the sides of a triangle taken in order, these will be in equilibrium

4.if the forces acting on a particle be represented in magnitude and direction by the two sides of a triangle taken in order, their resultant will be represented in magnitude and direction by the third


Question:
For lifting a load of 50 kg through a distance of 2.5 cm, an effort of 12.5 kg is moved through a distance of 40 cm. The efficiency of the lifting machine, is

1.60%

2.65%

3.70%

4.25%


Question:
If the angle between the applied force and the direction of motion of a body, is between 90° and 180°, the work done, is called

1.virtual work

2. imaginary work

3.zero work

4.negative work.


Question:
ime required to stop a car moving with a velocity 20 m/sec within a distance of 40 m, is

1.2 sec

2.3 sec

3.4 sec

4.5 sec


Question:
The following factor affects the orbit of a satellite up to an altitude of 720 km from the earth's surface

1.uneven distribution of the gravitational field

2.gravity of the sun and the moon

3.aerodynamic forces

4.none of these.


Question:
Newton's law of Collision of elastic bodies states that when two moving bodies collide each other, their velocity of separation

1.is directly proportional to their velocity of approach

2.is inversely proportional to their velocity of approach

3. bears a constant ratio to their velocity of approach

4.is equal to the sum of their velocities of approach.


Question:
One end of a light string 4 m in length is fixed to a point on a smooth wall and the other end fastened to a point on the surface of a smooth sphere of diameter 2.25 m and of weight 100 kg. The reaction between the sphere and the wall of the arrangement made is

1.102.5 kg

2.105.5 kg

3.108.5 kg

4.110 kg.


Question:
Pick up the incorrect statement from the following. In case of suspension bridge due to rise in temperature,

1.dip of the cable increases

2. length of the cable increases

3.dip of the cable decreases

4.none of the these.


Question:
The characteristic of a couple, is :

1. algebraic sum of forces, constituting a couple is zero

2.algebraic sum of moments of forces, constituting a couple, about any poin, is same

3.a couple can be balanced only by a couple but of opposite sense

4. all the above.


Question:
The following is not a law of static friction :

1.The force of friction always acts in a direction opposite to that in which the body tends to move

2.The force of friction is dependent upon the area of contact

3.The force of friction depends upon the roughness of the surface

4.The magnitude of the limiting friction bears a constant ratio to the normal reaction between two surfaces.


Question:
The following statement is one of the laws of Dynamic friction

1.The force of friction always acts in a direction opposite to that in which a body is moving

2.The magnitude of the kinetic friction bears a constant ratio to the normal reaction between two surfaces. The ratio being slightly less than that in the case of limiting friction

3.For moderate speeds the force of friction remains constant but decreases slightly with the increase of speed

4. all the above.


Question:
The inherent property of a body which offers reluctance to change its state of rest or uniform motion, is

1.weight

2.mass

3.interia

4.momentum.


Question:
The resolved part of the resultant of two forces inclined at an angle θ in a given direction is

1.algebraic sum of the resolved parts of the forces in the direction

2.arithmetical sum of the resolved parts of the forces in the direction

3.difference of the forces multiplied by cosine θ°

4. sum of the forces multiplied by the sine θ


Question:
The shape of a suspended cable under its own weight, is

1.parabolic

2.circular

3.catenary

4. elliptical.


Question:
Two forces of 6 Newtons and 8 Newtons which are acting at right angles to each other, will have a resultant of

1.5 Newtons

2.8 Newtons

3.10 Newtons

4.12 Newtons


Question:
WEffect of a force on a body depends upon its

1.direction

2.magnitude

3.position

4. all the above.


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!